Static Phase Converter, Runs 1-3 HP, 3-Phase Motors 230V w/Single Phase Power

Description

AUcontrols
, (
Electronic Controls
) Made in USA.
Model: ASPC-3HD.
Static Phase Converter to Run 1 to 3 HP, 230VAC, 3-phase motors with single phase power 230 VAC.
You can Run 3-phase Motors with Single Phase Power at 2/3 of Rated Motor's HP.
DESIGNED to RUN 3-Phase Motors ONLY! and FOR LIGHT to MEDIUM MOTOR LOADS.
Single Phase FLA: 9.6 Amps.
Dimensions: 6" x 6" x 4"
Warranty: 1 Year.
IMPORTANT:
ALWAYS Make sure your Motor's HP is between the Converter's HP!
DO NOT Install a bigger Converter than your Motor's HP thinking it will give you more power, It will NOT work!
Nor use a smaller Converter than your Motor's HP, It will NOT work eaither!
If you have any questions please contact us, we'll be happy to assist you with the Phase Converter you need.
You can run:
Lathes above 3 HP not fitted with a clutch, Milling & Drilling Machines, etc. For Air compressors compressors, blowers, water pumps, hydraulic pumps, etc.
The motor's pulley diameter must also be reduced by 1/3 or a 50% larger motor can be fitted
. For heavy starting cycles, frequent starting, instant reversing, etc.
Just keep in mind the Motor will give ONLY 2/3 of the rated Motor's HP.